Al Hoty Company is the place where you can build your career. Our open, challenging, and motivating environment gives our people the energy and enthusiasm to grow and succeed. Through continuous development and training programs, Al Hoty Company is committed to improve the knowledge and skills of its associates to help them fulfill their career and personal life aspirations.
Al Hoty Company is continuously looking for enthusiastic, and qualified professionals to meet the demands of a rapidly growing markets. Please submit your application only against the position where your qualifications and experience match our requirements. Send your application to
ahcjobs@al-hoty.com

Current Openings

(1)Sr Electric Sys Oper (Electrician or Electrical Tecnician)

Provide a high degree of expertise in coordinating and implementing complex switching instructions and procedures in the field.
Performs initial troubleshooting to determine cause, whom, and what is needed to repair a power system disturbance and is expected to make on-the-spot decisions during power system emergencies.
Goes to the scene of reported power outages or power system disturbances, logs targets and reports same. In cases requiring immediate action, uses independent judgment to restore power or isolate parts of the electrical system which endanger life or property.
Provides cable routes, identification of cables and proof of isolation, when necessary.
Commissions loop pad mounted transformers
Vacancies : 1
Location : Saudi-Arabia
Job Details : Minimum Requirements

• : - Diploma on Electrical and Certified electrician


• : - Eight (8) years experience in power system construction, commissioning, maintenance.


• : - Has the capability to rack in and out of power circuit breakers (34.5 kV, 13.8 kV, 4.16 kV, and 480 volts) with or without remote racking devices.


• : - Has the capability to perform switching between high voltage and low voltage redundant switchgear equipment, UPS and Battery Chargers, ATS and Emergency Diesel Generators.
• : - Has the capability to isolate the electrical equipment for maintenance purposes by isolating all feed backs from PT’s, CT’s, other lines.
• : - Has the capability to ground the electrical equipment for maintenance purposes using ground buggies and portable grounding wires/devices.
• : - Familiar with electrical codes and standards, all kinds of testing equipment.

Posted on : 01 july 2013
Preferred Nationalities : Arabs, Phillipino, Pakistani, Indian

(2)Safety trainer

Minimum BSc in Industrial Safety relevant to engineering discipline from a recognized institute or university. Possess safety professional certification such as OSHA, NEBOSH Certificate or NSC Advanced Certificate Ten (6) years' experience in delivering industrial safety training and facilitating workshop is preferred. Hands-on experience in industrial safety management and oil / gas plants operation and/or petrochemical industry would be beneficial. Expertise in process hazard analysis, Emergency, response program, risk communication, risk assessment, qualitative / quantitative & Hazard communication. Familiarity with industrial Safety products and requirements. Experience with instructional program which incorporate blended - learning or simulations. Excellent interpersonal and presentation skills. Fluency in English language with computer skills in Microsoft Word, Excel, PowerPoint.

(3)Telecommunication

6 years’ experience in telecommunications field, at least 1 year in a training activities. Experience should include maintenance of Telecommunications Radio systems such as Trunking Radio systems.
Candidate must have good knowledge on TETRA radio systems including the base station and consoles.

(3)Telecommunication

6 years’ experience in telecommunications field, at least 1 year in a training activities. Experience should include maintenance of Telecommunications Radio systems such as Trunking Radio systems.
Candidate must have good knowledge on TETRA radio systems including the base station and consoles.

(4)Electrical

4 years’ experience as maintenance Engineer or 11 years’ experience as technician in class 1, Division 1, Oil & Gas/ Petrochemical industry, Power plants industry and Desalination plants
Able to troubleshoot and repair AC machines, able to maintain HV transformers HV/LV switchgear, UPS (Interruptible power supply) systems and Motor operated valves, using electrical/ electronic, test equipment, schematics and one line diagrams.
Maintain and troubleshoot HV breaker and transforms.
Basic operation / programming of PLC.

(5)Operator Trainer

11 years’ experience as a qualified Supervising or Control board Operator for the Oil & Gas/ Petrochemical industry, Power plants industry and Desalination plants or BSc with minimum 4 years’ experience).
Experienced in One or more of the following Processes: Distillation/fractionation, reactor/catalytic, cryogenic, hydro treating, GOSP, WIP, utilities or tank farm operations. DCS experience Preferred.

(6)Instrument Technician [PCST]

11 years’ experience in Pneumatic, Electronic and Digital Instrumentation in Oil & Gas/ Petrochemical industry, Power plants industry and Desalination plants or BSc with minimum 4 years’ experience).
Experience should include PM of Field Devices (DVCs, Smart Transmitters, conventional Transmitters, Valves, Controllers and FF devices).
Troubleshooting Process Control Systems.
Knowledge and experience on DCS (Yokogawa Centum, HoneywellTDC3000, DeltaV) and PLC (Tricon, Siemens, AB) is an advantage.

(7)Mechanical

4 years’ experience as mechanical engineer or 11 years field experience as a mechanical maintenance technician in Oil & Gas/ Petrochemical industry, Power plants industry and Desalination plants
Experience in disassembly, inspection and repair of valves, pumps, gearboxes, and compressors. Experience in operating lathe machines is preferred.
Knowledge and experience in the following mechanical subjects: Bearings and Lubrication, LASER alignment, Vibration analysis, motor operated valve actuators, Mechanical seals, and Turbines.

(8)Welding Trainer

11 Years’ experience as a welder working in Oil & Gas/ Petrochemical industry, Power plants industry and Desalination plants Candidate should have served minimum 3 years apprenticeship or approved CITB training
Candidate should have hands on experience of SMAW method, welding of structural steelwork and Pipe welding of carbon steel, using both E-6010 and E-7018 electrodes for open root, fill, and cap, plate sizes up to ¾ inch thickness and pipe sizes from 1 inch up to 8 inch schedule 40 – schedule 140 pipe or BSc with minimum 6 years’ experience).
Candidate should have hands on experience in GTAW of Stainless steel, Carbon Steel and low alloy pipe welding of small bore pipe 1 inch to 2 ½ inch diameter.
Candidates should have been certified to 100% Radiographic standards in accordance with any of the following: AWS, ASME/ANSI, API, BS, ASTM Codes and standards for welding certification.

(9)Test Analyst

The “Area Test Analyst” is the custodian of the Online Testing (OLT) Rooms in his area. He works under the supervision of the Academic Principal and the area Superintendent/Asst. Superintendent. He will be responsible for handing tasks such as but not limited to the following:

• Monitoring OLT sessions and reporting related problems to the Academic Testing Group (ATG)
• Recording all activities taking place in the OLT rooms in a suitable logbook
• Preparing the OLT rooms for the testing sessions
• Displaying clear signs that all online tests are monitored through surveillance cameras.
• Handling unexpected technical problems during the testing sessions
• Ensuring that all video monitoring equipment is turned on and then switched off at the end of the working day.
• Keeping the Online Testing (OLT) room keys and OLT server cabinet/room in a safe place
• Preventing access to the OLT server unless authorized by the Test Group Leader
• Preventing all OLT room users from altering and/or exploring the settings of the student computer stations

Minimum requirements:
Candidates for this position should have a BSc in Computer Science/IT or a BA in academic fields, preferably in “Teaching English as a Foreign/Second Language, or even Education”. Preference will be given to candidates with good coordination/communication skills, good computer skills and adequate experience in handling testing issues.

(10)ITC Registrar

Associate Degree or Completion of a minimum of 2 years of college studies Experience:Minimum of 7 years, of which 3 years in supervision of clerical staff. ADDITIONAL REQUIREMENTS: Good ability of spoken and written English language skills Good knowledge and skills in preparing narrative and statistical reports High degree of personal maturity.

(11)Admin Asst

Completion of Clerical Training Program, College Degree is a plus. 5 yrs experience in the clerical in an engineering environment. Ability to type in English at 45 net words per minute at 85% minimum accuracy. Proficient in using PC, MS Word, Excel and Powerpoint.

(12)Admin Clerk

Completion Clerical Training Program. College graduate is a plus. 4 years experience in the clerical in an engineering environment. Ability to type in English at 45 net words per minute at 85% minimum accuracy.

(13)Asst Engineer I

College degree. 8 years work experience OR 2 year degree in engineering technology or a closely related field plus 4 years or relevant experience in engineering support work, of which two years should have been within the areas of technical specialization. Fluency in English; broad knowledge of engineering terminology and relevant testing procedures & specifications.

(14)Asst Engineer II

Completion Vocational Diploma, College graduate is a plus. 6 yrs work experience OR 2 year degree in engineering technology or a closely related field plus 2 years or relevant experience in engineering support work, of which two years should have been within the areas of technical specialization. Ability to read and write English, knowledge of engineering terminology. Ability to drive a car.

(15)Construction Engineer I (Civil, Mech, Instrument, Electrical )

BS Engineering, 10 years work experience in construction or associated engineering fields. Well-rounded knowledge of project management, cost control and cost estimating; must be completely familiar with International Building, Utility and Piping codes; familiar with budgeting and accounting procedures, should be well informed on Standard Safety practices.

(16)Construction Engineer II (Civil, Mech, Instrument)

BS Engineering, 8 years work experience in construction or associated engineering fields. Well-rounded knowledge of project management, cost control and cost estimating; must be completely familiar with International Building, Utility and Piping codes; familiar with budgeting and accounting procedures, should be well informed on Standard Safety practices.

(17)Construction Engineer III (Civil, Mech-Piping, Mech-Rotating, Electrical)

BS Engineering graduate, 5 years work experience in construction, design or project management.

(18)Cost Engineer I

BS Engineering, Construction, Management, Economics, Bus Admin, or Accounting, or closely related major. Min 9 years cost engineering experience including at least five years devoted to petrochemical, refinery, pipeline, or power generation projects. Must be familiar with construction practices, materials, equipment. For none engineers, min 12 years cost engineering experience is required. Must have ability to communicate fluently in both spoken and written English.

(19)Cost Engineer II

BS Engineering, Construction, Management, Economics, Bus Admin, or Accounting, or closely related major. Min 7 years cost engineering experience including at least 3 years devoted to petrochemical, refinery, pipeline, or power generation projects. Must be familiar with construction practices, materials, equipment. For none engineers, min 10 years cost engineering experience is required. Must have ability to communicate fluently in both spoken and written English.

(20)Cost Engineer III

BS Engineering, Construction, Management, Economics, Bus Admin, or Accounting, or closely related major. Min 5 years cost engineering experience including at least 3 yrs devoted to petrochemical, refinery, pipeline, or power generation projects. Must be familiar with construction practices, materials, equipment. For none engineers, min 7 years cost engineering experience is required. Must have ability to communicate fluently in both spoken and written English.

(21)Cost Engineer IV

BS Engineering, Construction, Management, Economics, Bus Admin, or Accounting, or closely related major. Min 2 years cost engineering experience including at least 1 year devoted to petrochemical, refinery, pipeline, or power generation projects. Must be familiar with construction practices, materials, equipment. For none engineers, min 5 years cost engineering experience is required. Must have ability to communicate fluently in both spoken and written English.

(22)Construction Materials Specialist I

BS Degree. Fourteen (14) years combined experience in two or more of the following areas; project design and construction, purchasing, materials inventory control, scheduling/forecasting, or construction contract administration A good command of written and spoken English. Thorough knowledge of the ARAMCO materials systems and the ability to set-up and operate a material accountability system for a medium to large scale project.

(23)Construction Materials Specialist II

BS Degree. 12 years combined experience in one or more of the following fields; construction, project design, project planning and scheduling, procurement, site materials control, or materials scheduling and forecasting. Good command of oral and written English. Working knowledge of the ARAMCO Materials System including allocation and issuing procedures, teleprocessing equipment usage and materials accountability. Ability to set-up a materials accountability system for a small to medium scale project.

(24)Construction Safety Advisor

BS Degree. 11 years of heavy construction experience, preferably in the petrochemical or process areas. Ability to communicate effectively in oral and written English is essential. Knowledge of applicable Aramco and U.S. construction standards, codes and regulations. Membership in a recognized professional safety society such as the Institute of Industrial Safety Of Officers is desirable.

(25)Secretary

College degree or secretarial course graduate. 5 years of experience performing general secretarial duties, with emphasis on task adaptability. Excellent knowledge of oral and written English. Typing speed 55 net wpm, 85% accuracy, can take and transcribe shorthand at 70 wpm, 90% accuracy. Computer literate: word processing, spread sheets, etc.

(26)Document Controller

At least Vocational Diploma/Certificate from a 2 year Technical course. College degree would be a plus, with previous experience working in a project environment. Computer literacy is a necessary along with organizational skills. At least 3 years related work experience in office work, documentation and control. Knowledge of Engineering disciplines like Civil, Mechanical, Electrical, etc.

(27)Engineer I (Civil, Mech, Electrical, Safety, Instrument, Process)

BS Engineering. 9 yrs work exp, pref in the oil industry or similar process industry. Must have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, U.S. and Aramco's Codes, Standards and Specifications.

(28)Engineer II (Civil, Mech, Electrical, Safety, Instrument, Safety)

BS Engineering. 7 years in the oil industry or similar process industry. Capable of project and design assignments. Thorough knowledge of English is required to perform analyses and studies in depth, make professional presentations and keep up with technical advancements; must have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, US and Aramco Codes, Standards and Specifications.

(29)Engineer III (Civil, Mechanical, Electrical, Safety, Instrument)

BS Engineering. 5 years professional experience, preferably in the oil or similar process industry. Must have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, U.S. and Aramco's Codes, Standards and Specifications.

(30)Engineer IV (Civil, Mech, Electrical, Safety, Instr, Communication, Commissioning)

BS Engineering (fully accredited). Minimum of four years experience. Must have ability to communicate fluently in English both in writing and orally.

(31)Estimating Engineer I

BS or Associate Engineering Degree. Min 5 years estimating experience devoted to petrochemical, refinery, pipeline, or power generation projects. Must be familiar with construction practices, materials and equipment. Ability communicate fluently in both spoken and written English.

(32)Engineering Aide-Plant Inspection (Safety)

Completed Vocational course. 4 yrs work experience. Interpret blueprints. Performs a variety of routine field and semi-technical loss prevention tasks at the direction of fire prevention engineers and loss prevention engineers and/or advisors.

(33)Material Specialist

College Degree, 7 years relevant work experience or secondary school diploma with 15 years relevant work experience in one of the following: construction design or project planning, materials procurement, materials control or materials scheduling/forecasting. Good command of oral and written English. Thorough knowledge of inventory control principles and forecasting systems.

(34)Materials Controlman

Completion of clerical vocational course, College graduate is a plus. 5 years relevant experience in materials supply activities. Ability to type at 25 words per minute and be familiar with or CRT operations as they relate to the job assignment.

(35)Project Management Specialist

BS Engineering or Business, plus significant post graduate participation in technical or PM related seminars. Preferably an MS, MBA or higher degree. The incumbent will normally have achieved industry recognition through activities on committees of professional societies and industry organizations like PMI, AACE, SAVE International or others. Min 12 years experience, including 6 years in his main field. Professional certification by AACE, PMI, or the professional engineering boards. Capable of evaluating and consulting on project problems where precedents are lacking or on problems where a high degree of specialized knowledge is required.

(36)Planning & Programs Analyst II

BS Engineering. 6 years experience in management of operating costs, budgets, or related activities, 3 yrs experience in SAO. (Saudi Aramco) OR BS in Bus Admin, Accounting, or Financial Mgmnt. 8 yrs experience in cost control, budgets, or related activities, including 3 yrs experience in SAO. Excellent command of oral and written English. Must have ability to perform statistical and problem analyses while working under time constraints, and have working knowledge of applicable EDP systems and programs.

(37)Scheduling Engineer

BS Engineering, Construction, Management, Economics, Bus Admin, Accounting, or related major. 2-9 years responsible planning and scheduling using Primavera v3, experience including 1-5 years in either petro-chemical, construction, heavy or high technology industries. Should be an expert in planning, scheduling and project control systems. Must be able to communicate fluently in both oral and written English.

(38)Maintenance Engineer Civil, Mechanical, Electrical)

BS Engineering. 5 years job related experience. Have the ability to apply an engineering analysis and appraisal to maintenance techniques and practices, to the selection and utilization of tools, equipment and materials, and to design and handle installation details, have considerable practical knowledge and experience in maintenance methods and practices.

(39)Technical Clerk Engineering

Completed vocational diploma, college degree is a plus. 4 yrs experience with the engineering system, knowledge of pertinent statistical, technical and administrative functions, good knowledge of oral and written English in order to prepare grammatically correct reports, summaries, and correspondence, good knowledge of policies, procedures, operational activity, and reporting methods applicable, methods to present statistics by the use of charts and graphs. Ability to type min 25wpm.

(40)Sr Construction Specialist (Safety)

College Degree. Position requires a min of 10 year experience in the construction field, min of 5 years in a supervisory position equivalent to a Foreman of Metals, Critical crafts or Site Superintendent with cognitive construction direction responsibility. Preferably with oil field related experience.

(41)Communications Engineer

BS Engineering. 9 years work experience in the field of networking, telecommunications and radio, Instrumentation, SCADA and RTU. Knows managing projects and attending regular meetings to discuss the best way to move projects forward; participating in conference calls and meetings to discuss products, action plans, or team performance; managing resources, including budgets, physical resources and staff; preparing high-quality written reports and presentations for management and customer review; ensuring that projects are delivered on time, within budget and to agreed standards of quality.